Telescoping Flagpole (120.111) Help

Why Choose Telescoping Flagpole?

Measurements & Sizing

Half-Staffing

Installation & Materials Required

Why Choose Telescoping Flagpole?

Raises and lowers in sections so adjustments are a breeze
No ropes, pulleys, or halyards so flag flies quietly
Flag attaches to 360° rotation collar so it won't tangle or knot
To remove, just pull from provided ground sleeve
Easily change flagpole locations with additional ground sleeve
Manufactured with 16-gauge anodized aluminum and never needs painting

Pole Raising & Lowering Zoom In

Top

Measurements & Sizing

Pole Diameters

Note: measured at bottom of pole:

2.5" (20' & 25' poles)
2.25" (16' pole)

Recommended Sizes

Pole Height	Flag Size
16'	3' x 5'
20'	3' x 5'
25'	4' x 6'
30'	5' x 8'
35'	6' x 10'
40'	6' x 10'

Top

Half-Staffing

To half-staff using the telescoping flag pole, move the flag from the top position to the bottom, second-flag position. In addition, to enhance the effect, you may also lower your pole one position to reduce its height.

Top

Installation & Materials Required

Telescoping flagpole PVC sleeve (included)
Approximately three 60-lb bags of concrete mix
Measuring tape or yard stick
Contractor’s level
Small rock or coarse gravel container for mixing concrete

Dig a hole 28” deep by 12” round and place 6” of small gravel for drainage on the bottom of the hole. Insert bolt in sleeve. Place sleeve in hole. Surround sleeve with cement, place level on top of the sleeve to see that it is level. Set and cure overnight.

Installing Flagpole Zoom In